Skip to product information
1 of 9


Vaphit X Vaporizer

Vaphit X Vaporizer

Regular price £34.95 GBP
Regular price Sale price £34.95 GBP
Sale Sold out
Shipping calculated at checkout.

The Vaphit X. An all new product for 2024!

Tip & Cap + Accessories option available now! Get just the tip and cap to add to your own stem! (see package contents below for details)

The Vaphit X is a an all new product for 2024. If you've used any of the Vaphit range such as the 3D, or DNA Vaporizer you will be familiar with the design. The Vaphit X offers several improvements on these models, with the most notable improvement being the full solid stainless steel stem - compared to a Standard DynaVap stem and tip this thing has a very heavy weight, and feels great in the hand.

Another notable addition is the inclusion of Quartz balls. These balls can be loaded into the stem to assist with rapidly cooling the vapor. If the balls aren't for you, use without. There are a few extras balls included in the event some are lost.

To clean, simply strip down of o-rings separate the parts and soak in isopropyl alcohol (70%+) and rinse. Balls can be easily cleaned by soaking and gently shaking around in a container.

Please see images for a guide on how to load Quartz balls.

Key Features:

  • Solid Stainless Steel Stem
  • Quartz Cooling Balls
  • X airport - allowing a wide range of airflow adjustment
  • All NEW tip design. Holes in the tip promote airflow and promote more consistent vaporization
  • Selection of o-rings included. Perfect for fitting normal and odd-sized stems to the tip & cap.
  • 8mm Stem. YES, you can use all your favourite 8mm tips (DynaVap) with the included stem.

Package Contents:

Vaphit X Full Device

  • 1x X Stainless Steel Stem
  • 1x 316 Stainless Steel Tip (Upgraded 2024 Edition)
  • 1x Quartz Heating Cap (1.0mm Holes)
  • 1x Quartz Heating Cap (1.5mm Holes)
  • 1x Packing Tool
  • 1x Vaphit Carry Case
  • 1x 5-Pack of 304 Stainless Steel Screens
  • 1x Pack of Quartz Balls
  • 1x Bamboo Tweezers
  • 1x Cleaning Brush
  • 1x 10-Pack of 6.5mm*1.2mm O-Rings
  • 1x 10-Pack of 7.0mm*1.2mm O-Rings
  • 1x 10-Pack of 7.5mm*1.2mm O-Rings
  • 1x 10-Pack of 9.5mm*1.2mm O-Rings
  • 2x Packs of O-Rings for upper part of stem (where the Quartz cap rests)

Tip & Cap Set

  • 1x 316 Stainless Steel Tip (Upgraded 2024 Edition)
  • 1x Quartz Heating Cap (1.0mm Holes)
  • 1x Quartz Heating Cap (1.5mm Holes)
  • 1x 5-Pack of 304 Stainless Steel Screens
  • 1x Bamboo Tweezers
  • 1x 10-Pack of 6.5mm*1.2mm O-Rings
  • 1x 10-Pack of 7.0mm*1.2mm O-Rings
  • 1x 10-Pack of 7.5mm*1.2mm O-Rings
  • 1x 10-Pack of 9.5mm*1.2mm O-Rings
  • 1x 10-Pack of 10mm*1.2mm O-Rings


View full details

Customer Reviews

Based on 13 reviews
Wayne siegertsz

Vaphit x is a nice device but theres more chance of burning the flower as unlike Dynavap it doesn't click to tell you when your at the right temp to vape


Just get an old Dynavap.
The case is good but don't be impressed by 200 o-rings thinking you get a lot.
Probably for the same price you can find a 2020 M or a B.
The VaphitX weighs a ton, the beads are a bit gimmicky, the quartz lids don't fit in Ispire wand and it's all guess work unlike dynavaps reactive caps.
Would have refunded and got the M7XL if it was possible.
Just my 2c.

Frazer Scott
Great Vaporiser

It's a great device and now my preferred device after a few weeks with it. They didn't include instructions but it's easy to put together but I have tips for anyone ordering. I've found best way for me is. Half full with the beads, use the metal bits on both ends instead of the little star shaped bit. Heat on the low side compared with the dynavap. My old setup needed 30 + seconds of heating and this needs an initial no more than 10 on the same lighter. If you don't over heat and burn it's a great device. If you overheat it I've found it's a lot harder than a dynavap to clean. Must be the materials but the resiny stuff really really gets burnt onto this thing. If you don't burn it's a delight to clean and just a bit soak in hot water after a little scrub with alcohol soaked cotton buds. I've not bothered to measure the size of the bowl but compared to my dynavap m this thing really hits well. I'm guessing you don't want to drop it, it's a heavy device and the tips don't look like they would like to be dropped. It comes with 2 tips and I prefer the one with smaller holes but they are both different. It comes with loads of orings and I have yet to break one. The metal mesh bit can be very fragile and I have found trying to remove front the tip had a high chance of breaking them. It's best just not to gunk it up. If you do need to remove it DO NOT use the little cleaning poking device they give you with it (which is great by the way and really useful) because it will just break it. If it's stubborn just give it a soak in alcohol or heat it to break up the resin stuff. Then use something that will apply even preasue to get it out. I burned mine like an idiot then poked at it and they break easy. It's very heavy but that's good for me, if you have hand issues it might be awkward to use. If you are gentle they are ok. For the price is a lot of value and I've pretty much only used this since I got it so it's also a really good device.

Paul K
Caps not fit for purpose!

I bought this vape after hearing about it on the Medical Cannabis Reddit page.

My Dynavap had been out of action for some time, as I resented paying nearly £20 to replace the gauze and a few o-rings.
For the sake of £14 more I was getting this vape along with ample gauzes and o-rings, which all fit my Dynavap. Seemed the obvious thing to do as it looked quality and had rave reviews.

I’ve had mine now for nearly 2 weeks. In that time I estimate I’ve used it on a maximum of 15 occasions, and both caps, along with a replacement, making that 3 caps in total, have broken in the same place through the centre of the end of the cap (I’ll attach photos if I can). The end appears to be thinner than the walls of the cap, is clearly a different material to the walls, and I suspect is simply made from thin glass.
I’ve never knocked or been rough in any way with the caps, so i suspect they’re intolerant to the heat, which is really disappointing, as the main body of the vape is high quality.

I’m fortunate that I can use my vap-cap on this vape otherwise it would be useless to me, which is why I give it 1 star.

Brian Binns
Fabulous Products

Super easy to order, quick (free) delivery, will be using again very soon

We Love Dynavap!

We are big lovers of the legendary Dynavap device. As such we have used many Dynavap accessories in our time. Now we want to bring the community some of the best curated devices and accessories on the market. Based out of the UK you can trust in the quality of our products.

  • Our Promise To You.

  • Efficient

    All of our devices are engineered with utmost efficiency in mind. We believe in providing simple yet effective solutions.

  • Effective

    Our products are curated accessories and devices that are designed to elevate your dry herbal experience to new levels.

  • Elaborate

    Simplicity is a virtue, but sometimes dynamic solutions are required. We are proud to provide refined excellence.

Refined Excellence.

Simple solutions are sometimes the best.

The Stainless Steel Triple Adaptor allows a Dynavap user to experience a higher level of enjoyment. Whilst elegantly cutting packing and dosing time by 66%.

Cut vaping times like a hot-knife through butter.

Small form factor.
Large clouds.